TC1 + TMI1 Combined — VIC
Traffic Controller Skill Set for Urban Streets and Low Volume Rural Roads (+ Traffic Management Implementer Skill Set)RIISS00058 + RIISS00060 · Statement of AttainmentEntry training for traffic control and traffic management implementation on Category 1 roads. You need a Statement of Attainment for CPCWHS1001 (the White Card unit) to enrol.
Issued by Edway Training (RTO 91401)
What this course covers
You train in the Traffic Controller (TC1) and Traffic Management Implementer (TMI1) skill sets for Category 1 roads — urban streets and low-volume rural roads.
It is for people entering traffic management and civil construction workers formalising their traffic control and implementation skills.
Your Statement of Attainment covers six nationally recognised units. The Traffic Controller skill set (RIISS00058) is RIICOM201E Communicate in the workplace, RIIWHS205E Control traffic with stop-slow bat, and RIIWHS206 Control traffic with portable traffic control devices and temporary traffic signs.
The Traffic Management Implementer skill set (RIISS00060) adds RIIRIS301E Apply risk management processes, RIIWHS302E Implement traffic management plans, and RIIWHS303 Position, set up and program portable traffic control devices. RIICOM201E is shared by both skill sets.
- What you'll learn
- Control traffic with stop/slow bats and portable traffic control devices
- Deploy basic traffic signs and communicate safely at work
- Implement traffic management plans and traffic guidance schemes
- Apply risk management processes and set up traffic control devices
Before you book
A quick language check is part of enrolment. You'll need enough English to read, write and understand the course. After booking, you'll complete a short language, literacy, numeracy and digital (LLND) check in your student account. You need to pass it to do the course. Not sure? Try a practice check first. If you don't pass, you get a full refund minus the $30 administration fee.Try a practice check
What you'll need
Minimum age 18. You must be 18 or over to do this course.
A USI. A Unique Student Identifier.
Photo ID. A valid photo ID, shown when you arrive on the day.
Statement of Attainment for CPCWHS1001 (the White Card unit). Send it in before the course: upload it in your student account or email it to us. A copy of the plastic White Card is not accepted for this course. Did your White Card with Edway? We already have it on file.
For the practical day. Steel-capped safety boots, long work pants, a long-sleeved work shirt, a broad-brimmed hat, safety glasses and high-visibility clothing.
Your workplace practical. After your three training days, you have up to 6 months to complete the practical that finishes your skill sets: 20 logged hours of traffic control plus 3 traffic-management setups. Then your TC1 and TMI1 assessment and sign-off are completed together on one final assessment day at Hallam.
Bring everything listed for the practical training day, plus:
- Hard hat
- Work gloves
- Sunscreen
- Compliant wet-weather gear when required
- A 5-watt two-way radio before starting your 20-hour Traffic Controller placement
Your placement provider may require additional PPE. Confirm its requirements before attending. All PPE must fit properly, be suitable for the work and be in serviceable condition.
Download the PPE checklist (PDF)Your certificate, in Victoria
Statement of Attainment
for skill sets RIISS00058 (TC1) and RIISS00060 (TMI1) — 6 units
Emailed when you finish and available to download from your student account.
TTM Digital Card
A digital card recorded on the Austroads national practitioner register after you complete the post-course practical. It is valid for 3 years from the date of issue.
Why do this course?
Traffic control work in Victoria starts here — whoever runs the works has to put appropriately trained and qualified people on directing traffic, and this is the entry qualification for Category 1 roads.
Required for
- Traffic controllerYour card follows the post-course practical — 20 logged hours of traffic control plus three traffic management setups within 6 months — and one final assessment day at Hallam, where both assessments and sign-offs are completed together.
- Traffic management implementerTMI work has its own post-course practical — three traffic management setups within 6 months.
Commonly asked for
- Civil construction worker adding traffic control
Where your TTM Digital Card is recognised
Your TTM Digital Card is the working credential for Category 1 traffic management roles in Victoria.
Acceptance outside Victoria depends on the destination jurisdiction's current rules and any localised training requirement.
How you'll train
In person
Complete two theory days in Melbourne CBD and one classroom-simulated practical day in Hallam. Then complete the required workplace practical under qualified supervision within six months.
Where you'll train in Victoria
Venue details
Accessibility
There is a full step-free route with lift access to Level 1.
Getting there
The venue is a short walk from Anzac Station and Stop 20 Anzac Station on St Kilda Road. Anzac Station has lift access, and the tram stop has level-access platforms. If you need a low-floor tram, check tramTRACKER before you travel. Use the Transport Victoria Journey Planner for current services and disruptions.
Transport Victoria Journey Planner →Parking
There is no customer parking at the training venue. Paid public parking is available nearby at Nationwide Parking on Queens Road and at Wilson Parking's Gateway Car Park on St Kilda Road. Limited paid and time-restricted street parking may also be available. Always check the signs. Parking availability, hours and fees can change, so check the operator's website before travelling.
Finding the entrance
Enter through the main Bowen Crescent building entrance and go to Level 1. Suite 1.05 has Edway signage.
Food and coffee options are available nearby.
Venue details
Accessibility
Wheelchair-accessible entrance and an accessible restroom are available.
Getting there
The venue is about a 10–12 minute walk from Hallam Station. Bus services also connect at the station. Check the Transport Victoria Journey Planner before travelling for the most suitable current service and accessibility information.
Transport Victoria Journey Planner →Parking
Free on-site and street parking is available. You do not need to register or reserve a space.
Finding the entrance
Look for Unit 2. The exterior is clearly Edway-branded. Training Aid branding appears inside the venue.
What happens after you book
- 1Check your emailYour confirmation email shows your venue, date and time. It comes from no-reply@edway.edu.au. It usually arrives within a few minutes of booking.
- 2Set up your student accountLog in with the details in your confirmation email and set up your account.
- 3Have your USI readyA Unique Student Identifier is required for this course. Get or find yours at usi.gov.au.
- 4Complete a short LLND checkIn your student account you complete a short language, literacy, numeracy and digital (LLND) check. You'll need enough English to take part and to pass it.
- 5We confirm your enrolmentOnce you've finished the LLND check, we confirm your enrolment by email. If there's a problem with your eligibility, we'll contact you directly before you start.
- 6On the dayArrive 15 minutes early. Your ID is checked when you arrive. Bring full PPE for the practical day.
Complete the practical that finishes your skill sets
- 1Finish your TC1 and TMI1 workplace practicalsComplete both within 6 months.
- TC1 — 20 logged hours of traffic control
- TMI1 — 3 traffic management setups aligned to traffic management plans and traffic guidance schemes
- 2Come in for your final assessment dayYour TC1 and TMI1 assessment and sign-off are done together on one day at Hallam.
- 3Receive your TTM Digital CardOnce the post-course practical is complete, your digital card is recorded on the Austroads national practitioner register.
Ready to start traffic management training?
Choose a session that suits you and book online in minutes.
Related courses
Short Term Low Impact Traffic Management VICThe Victorian training for short-term, low-impact roadside work like pothole repairs and vegetation trimming — it does not qualify you as a Traffic Controller.In personLive online (Zoom)
Utilities TTM Worker AccreditationRestricted traffic management training for Victorian utility-sector workers — you need an employer letter to enrol.In personLive online (Zoom)
TC1 + TMI1 Combined and White Card VICBoth cards Victorian roadside and construction work needs — traffic control, and construction induction.In person
CPR Online (non-accredited)Learn CPR online at your own pace. Not accredited — you get a Certificate of Completion, not the nationally recognised certificate.Online, self-paced
CPRThe nationally recognised CPR certificate most workplaces ask for. 3 hours, in person.In person
First Aid Online (non-accredited)Learn first aid online at your own pace. Not accredited — you get a Certificate of Completion, not the nationally recognised certificate.Online, self-pacedWhite CardThe nationally recognised construction induction training you need before you can work on an Australian construction site.In personOnline, self-pacedLive online (Zoom)
Silica AwarenessNon-accredited, self-paced online training in recognising silica dust hazards and working safely around them.Online, self-paced
First AidNationally recognised first aid training, CPR included, so you can respond to an emergency until help arrives.In person
Advanced ResuscitationNationally recognised resuscitation and oxygen therapy training using specialised equipment. You need a current first aid certificate.In person
Childcare First AidNationally recognised first aid for education and care staff — the ACECQA-approved qualification covering first aid, asthma and anaphylaxis.In person
Advanced First AidNationally recognised training for managing a complex first aid situation and coordinating other first aiders.In personLooking for something else?
Short courses across construction, hospitality and workplace safety — browse the full list and book online.