Skip to main content
NSW02 9357 6544Other states03 9958 2900
SupportLogin
Home / Courses / Non-Friable Asbestos Removal

Non-Friable Asbestos Removal (Class B) — Melbourne

Remove non-friable asbestosCPCCDE3028 · Statement of Attainment

Hands-on training for construction and demolition workers who take bonded asbestos off site. You need a current White Card to do this course.

Issued by Edway Training (RTO 91401)

Nationally recognisedStatement of Attainment

Non-Friable Asbestos Removal in Melbourne runs at Hallam.

Book nowLearn more
Workers wet and support an intact bonded-asbestos sheet inside a controlled removal area

The training you need to remove bonded asbestos

Remove non-friable asbestosCPCCDE3028 · Statement of Attainment

You train to remove non-friable asbestos safely — the bonded material that is not crumbly, and the kind construction and demolition workers meet most often on site.

It is written for the people doing that work: construction and demolition workers taking bonded asbestos off site, and anyone who needs this unit before moving up to Class A friable removal or supervising.

Book with Asbestos Removal Supervision as a bundleBundle with Friable Asbestos Removal and save $75Bundle with White Card and save $50Bundle with Asbestos Removal Supervision and White Card and save $80
  • What you'll learn
  • Prepare for asbestos removal
  • Prepare the removal area and site
  • Enclose the removal site
  • Carry out the asbestos removal process
  • Carry out decontamination
  • Clean up the work site
  • Complete regulatory processes
Duration1 dayOne full training day
DeliveryIn personA classroom session with a trainer
AssessmentOn the dayYou complete your assessment in class
CredentialNon-Friable Asbestos RemovalRemove non-friable asbestosCPCCDE3028 · Statement of Attainment
RecognitionNationally recognisedAccepted in every state and territory

Before you book

A quick language check is part of enrolment. You'll need enough English to read, write and understand the course. After booking, you'll complete a short language, literacy, numeracy and digital (LLND) check in your student account. You need to pass it to do the course. Not sure? Try a practice check first. If you don't pass, you get a full refund minus the $30 administration fee.Try a practice check

What you'll need

A USI. A Unique Student Identifier.

Photo ID. A valid photo ID, shown when you arrive on the day.

On the day, you'll also show your photo ID.

A current White Card. You need a current White Card (CPCWHS1001, issued after May 2009). Without it, you can't do this course.

Workers wet and support an intact bonded-asbestos sheet inside a controlled removal area

Your credential

1

Statement of Attainment

CPCCDE3028 · Remove non-friable asbestos

Emailed to you when you finish, and always available to download from your student account.

2

Class B card

Your Statement of Attainment does not expire, and WorkSafe Victoria recommends refresher training about every 2 years.

The card's cost is included in the course price.

Why do this course?

Class B training is what gets you onto bonded asbestos removal jobs — a licensed removalist can't put you on the tools without it, and it's the unit you have to hold before you can go on to Class A or supervising.

Required for

  • Asbestos removal worker (bonded asbestos)Removal work is licensed work — you do it for a licensed removalist, or you hold the Class B licence yourself.
  • Demolition and strip-out workerRemoval work is licensed work — you do it for a licensed removalist, or you hold the Class B licence yourself.
  • Self-employed tradesperson removing bonded asbestos sheetingWorking on your own above the unlicensed limit means holding the Class B licence yourself, plus the supervisor competency.

Where your Statement of Attainment works

Your Statement of Attainment for CPCCDE3028 Remove non-friable asbestos is nationally recognised, so it is accepted in every state and territory.

Your Statement of Attainment travels with you. The Class B removal licence does not — each state and territory's work health and safety regulator issues its own.

Accepted as it is
VICNSWQLDSAWATASACTNT

How you'll train

In person

You attend a classroom session with a trainer. Your identity is checked when you arrive, and you complete your assessment on the day.

Where you'll train in Victoria

Edway Training and Training Aid's Hallam centre: Unit 2 in a row of industrial units, with the Edway Training sign on the front fence.
Hallam · MelbourneFree on-site parking
Unit 2, 35 Rimfire Dr, Hallam VIC 3803
Unit 2 in the Rimfire Drive complex, about a 10–12 minute walk from Hallam Station. Look for the Edway sign — the Training Aid branding is inside.
Get directions
Venue details

Accessibility

Wheelchair-accessible entrance and an accessible restroom are available.

Getting there

The venue is about a 10–12 minute walk from Hallam Station. Bus services also connect at the station. Check the Transport Victoria Journey Planner before travelling for the most suitable current service and accessibility information.

Transport Victoria Journey Planner →

Parking

Free on-site and street parking is available. You do not need to register or reserve a space.

Finding the entrance

Look for Unit 2. The exterior is clearly Edway-branded. Training Aid branding appears inside the venue.

What happens after you book

  1. 1Check your emailYour confirmation email shows the venue, date and time. It comes from no-reply@edway.edu.au. It usually arrives within a few minutes of booking.
  2. 2Set up your student accountLog in with the details in your confirmation email and set up your account.
  3. 3Have your USI readyA Unique Student Identifier is required for this course. Get or find yours at usi.gov.au.
  4. 4Complete a short LLND checkIn your student account you complete a short language, literacy, numeracy and digital (LLND) check. You'll need enough English to take part and to pass it.
  5. 5We confirm your enrolmentOnce you've finished the LLND check, we confirm your enrolment by email. If there's a problem with your eligibility, we'll contact you directly before you start.
  6. 6On the dayBring your current White Card, your photo ID and closed-toe shoes, and arrive 15 minutes early. Your ID is checked when you arrive.
Wondering about your credential? See What you'll receive.

Getting your Class B card in Victoria

  1. 1Upload your photoYour card carries a photo of you, so you upload one before it can be printed.
  2. 2Your card is printed and postedOnce your photo is in, your Class B card is printed and posted out to you.

Ready to book your Non-Friable Asbestos Removal course?

Pick your state, choose a session that suits you, and book online in minutes.

Choose a session
Workers wet and support an intact bonded-asbestos sheet inside a controlled removal area
$300
Choose a session