Non-Friable Asbestos Course Melbourne: What It Is and Who Needs It

One Digital
6 days ago
4 min read

Asbestos removal work carries legal obligations because disturbing bonded asbestos material requires regulated procedures and recognised training. The type of work being performed determines the qualification pathway and licence requirements attached to the job. That difference affects employment eligibility, subcontractor approvals and access to licensed asbestos work. Edway Training delivers the non-friable asbestos course for workplace asbestos safety training in Melbourne.

Licensed asbestos work requires recognised qualifications and training records.
Class B asbestos work requires recognised qualifications for licensed removal activities.
Removal work follows regulated handling, containment and decontamination procedures.
Licence thresholds can change once material size or removal time increases.

A worker removing bonded asbestos cement sheeting needs different training from someone completing general asbestos awareness online. Awareness training can help identify asbestos risks, but removal work requires task-based instruction because the worker is disturbing material, setting up the area and handling contaminated waste. A non-friable asbestos course teaches the removal process for bonded asbestos-containing material that does not crumble easily under hand pressure. In Melbourne, this training connects directly to Class B asbestos removal work.

What a Non-Friable Asbestos Course Covers

Removal work starts with preparation because the site must be controlled before asbestos-containing material is disturbed. Edway Training’s non-friable Asbestos Removal Class B course in Melbourne is an 8-hour classroom training session. Edway Training is authorised to give the training as certified by The Australian Skills Quality Authority, RTO No 91401. Successful participants receive a Statement of Attainment and a card issued by Edway Training.

The training covers the practical sequence used during non-friable asbestos removal training. Participants learn how to prepare for asbestos removal, prepare the removal area, enclose the site, carry out the removal process, decontaminate, clean the worksite and complete regulatory requirements.

Each stage of the training connects to the next because asbestos removal work depends on structured and strictly followed processes to control where fibres, waste and contaminated equipment travel during the job. Incorrect site setup, poor waste containment and incomplete decontamination procedures can spread contamination beyond the removal area. Workers, tools and equipment leaving the site without proper controls can carry asbestos fibres into surrounding work zones, vehicles and disposal areas.

What does the course include?

PowerPoint presentation content.

End-of-day practical and theory assessments.

Videos, class activities and class discussions.

Worksite preparation and clean-up processes.

Decontamination and regulatory process requirements.

Who Needs CPCCDE3014 Remove Non-Friable Asbestos Training?

If your work involves removing non-friable asbestos-containing material, the training requirement depends on what you are removing and how the job is carried out. Regulations require all workers and supervisors to complete CPCCDE3014 Remove Non-Friable Asbestos training to legally perform non-friable asbestos removal tasks. The course is also known as Class B asbestos removal training.

WorkSafe Victoria explains that a Class B asbestos removal licence allows the licence holder to remove all types of non-friable asbestos. It also states that asbestos removal is generally required to be carried out by a WorkSafe-licensed removalist or trained employees of a licence holder. This is where training records become a necessity, because WorkSafe requires proof of training of staff and site supervisors when licence applications are assessed.

Licensing and Removal Limits To Note

In Victoria, non-friable asbestos removal work must be performed by a Class A or Class B licensed person when the asbestos-containing material exceeds 10 square metres in total. The licence requirement applies when the total time spent on asbestos removal work exceeds one hour in any seven-day period, using the cumulative time worked by employees.

That threshold affects small renovation, demolition and maintenance jobs because a task can move into licensed removal territory once the material area or time spent increases. A worker may begin by checking bonded sheeting, but removal planning changes once the job requires isolation, waste containment, decontamination and formal asbestos removal procedures. An asbestos removal course in Melbourne gives workers the training record needed for that Class B pathway.

Course Entry Requirements and Training Day Documents

To register for Edway Training’s workplace asbestos safety training you are required to hold the CPCWHS1001 Prepare to Work Safely in the Construction Industry qualification issued after May 2009. Participants must present the Statement of Attainment on training day as proof. Old coloured cards, including Victorian red cards and NSW green cards issued before May 2009, are not accepted for this course.

Participants also need a valid USI and one form of photo identification, such as a passport, Australian driver’s licence or proof of age card. Student ID is not accepted. Entry can be refused if the required CPCWHS1001 evidence or valid identification is not provided, which means the booking alone does not guarantee access to the classroom session.

Book Edway Training’s non-friable asbestos course for removal work requirements.

FAQs About a Non-Friable Asbestos Course

What is included in a non-friable asbestos course?

A non-friable asbestos course includes site preparation, asbestos removal area setup, removal processes, decontamination, clean-up and regulatory process requirements.